-
Polycarbonate tubes and rod are generally not stock but can be special ordered relatively quickly. See below for general availability and email [email protected] for current pricing -
Polycarbonate tubes are not stock. They are sold in 8 foot lengths and by the case are we typically get shipments in every other week. See below for general availability and email [email protected] for current pricing. If images below are not clear on your device please click the thumbnail versions on the left side to view them resized
-
A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can. Pol-Ease 2300 is an effective release for most Polytek products but should not be used before pouring or brushing liquid silicone mold rubber - in this case Pol-Ease 2500 is the proper choice. Brushing out the release with a soft brush can improve results. -
An aerosol release agent that has two purposes. It can be used as a release when making silicone rubber molds as well as it can be used for spraying into molds where a more easily removed release agent is needed for painting or finishing cast parts. Pol-Ease 2500 should be brushed out with a soft brush for improved results. 13 Oz can. -
Partall® Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall® Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall® Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall® Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics. -
A two piece male/female quick disconnect. Maximum temperature is 500 deg -
The R-Cast2.0 is designed for mass casting like river tables, charcuterie board and any other artistic project. Improved cure time, 3-5 days Clear and bubble-free. Anti-yellowing UV resin Improved hardness adapted to the movements of the wood. Solvent-free RC2 can be used for pours greater than 1/2″ (1.3cm) and up to 2.5″ (5cm) taking volume into account. The use of fans is strongly recommended for thick castings. 30L Kits (~7.5gallon) available by special order for larger projects. Contact [email protected] -
R-EPOXY UV is a fast cure top coat epoxy (12 hours). Always respect 1A:1B mixing ratio.This resin is optimal for all kinds of coating applications with pours up to 1/4″ at once . It offers an ultra glossy finish. Ideal for Seal and repair knots and cracks in wood. Top coat for bar, countertop and table. Enhance wood, objects and canvas. Jewel and art Logo engraving on wood Commercial projects Looking for an epoxy to make river table, check out our R-Cast2.0 ! -
The new R-Fast is not only fast, it’s REALLY FAST! The R-Fast is specially designed for charcuterie board and any other artistic project. A maximum of 6 liters per pour is recommended. Improved cure time, 24 hours Clear and bubble-free. Anti-yellowing UV resin Improved hardness adapted to the movements of the wood. Solvent-free Maximum recommended thickness is 1″ with a maximum of 6 liters per pour. The use of fans is strongly recommended for thick castings. -
Red Tripoli Buffing Compound Bar Recommended for use on rough edges like saw cut edges followed by the White for Finished edges. Approx. 2lb bar. -
Each package contains one blade (gold) for material up to 1/8" thick, and one blade (green) for thicker materials. Designed to cut acrylic, polycarbonate, and styrene so smoothly that edges can be polished. Blades are 3.75" long. -
Acrylic sample sets Chips are approx. 2" x 3" https://plasticworld.ca/acrylic-color-chart/
-
Sign white Polycarbonate 3mm thick -
This material is also referred to as colloidal or fumed silica, and is an excellent thixotropic agent which is used to control the viscosity of mixed epoxy systems. Silica can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging. Product image on website may not match actual packaging due to use of multiple brands. -
Snip Tip Applicator Tips for E6000 Craft Glue 3.7oz Tubes Size: 3/4" x 2 1/2"; can be snipped to make small to large dispensing hole size Translucent plastic allows you to see the material in the nozzle while dispensing. -
Formulated for use on many surfaces including acrylics, Plexiglas, glass, polycarbonates, chrome, Formica, porcelain, fiberglass, and marble. Reduces glare. Repels finger smudges, dirt and dust. Anti-static, anti-fog. Fast-drying, non-streaking. Contains no chemicals or abrasives that will cause damage to any transparent surface. 19oz bottle -
Standard Cam Lock. 5/8" housing length, 5/8" diameter, 1-1/4"cam length. A simple way to add security, chome-plated locks include cam and 2 keys. -
Clear Acrylic. 1" Top diam. x 1/2" base x 3/4"h. These true-to-style acrylic knobs bring a contemporary look to your fixtures. -
Great Value Stand offs. 12mm Diam x 25mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. 19mm Diam x 30mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. 12mm Diam x 25mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more
-
Great Value Stand offs. 19mm Diam x 50mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. 25mm Diam x 25mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. Black 19mm Diam x 30mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. Black 25mm Diam x 25mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. Gold colored 19mm Diam x 30mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Great Value Stand offs. Gold colored 25mm Diam x 25mm High. Sold in packs of 4. or contact us for bulk rates on orders of 50 or more -
Super Sculpey is a very unique polymer clay, loved by artists, dollmakers and animation studios around the world. With a ceramic-like feel, Super Sculpey is available in a semi-translucent beige that, once baked, captures the glow of real skin
Social Contact