-
Out of stock
This prodcut has been disconutied by manufatre and replaced with Alumilite Amazing Mold Release Spray -
Alumilite Water Clear produces a high impact rigid clear casting that is commonly used for lenses, encapsulations, and water reproductions. Vacuum or pressure is recommended to achieve 100% bubble free castings. -
Mold Putty is a food-safe, easy to use, two-part silicone putty that allows you to make a flexible rubber mold in just ten minutes. Complies with FDA 21 CFR 177.2600 Extremely quick 2-minute open time Prior to using product, please read all Technical Data, Safety Data, and Instruction sheets -
Alumisol Hardener is an additive used in Alumisol to increase the hardness and firmness of the finished Alumisol casting. -
THIS PRODCUT HAS BEEN REBRANDED BY MANUFATURE AS " Amazing Casting Resin" as seen here: https://plasticworld.ca/product/amazing-casting-resin/ -
Amazing Casting Resin is an extremely easy to use casting resin that hardens in less than 10 minutes. Very thin consistancy and a 3 minute open time allows you to pour perfect parts everytime. (16 oz. size available under Starter Kits.) -
Amazing Clear Cast can be used as a casting resin or as a clear coat. It's low viscosity and 1:1 mix ratio by volume makes it extremely easy to use. Bubble free castings can be achieved by slowly mixing and pouring the resin. Amazing Clear Cast is compliant with FDA 21 CFR 175.300. -
Amazing Clear Cast Plus epoxy provides the same great features of our Amazing Clear Cast including an easy to use 1:1 mix ratio by volume, a brilliant high-gloss durable surface, and is FDA compliant; but now brings the added benefit of industry-leading UV resistance.- Can be colored with Alumilite dyes, alcoholic inks, or other non-water based colorants
- Compliant with FDA 21 CFR 175.300
- Epoxies in their unmixed state will naturally yellow with time
-
Amazing Mold Putty is an FDA compliant 2 component silicone mold putty. It is extremely easy to use by hand mixing 2 equal amounts of the yellow and white putty and cures within 20 minutes that gives users a flexible rubber mold with exact detail. It is the best product for making quick molds for resin, plaster, polymer clay, wax, chocolate, soap, and much more. -
Amazing Quick Coat is an easy to use 2-part epoxy that cures to a durable, high-gloss finish that is FDA compliant when accurately measured, properly mixed, and fully cured. This quick curing formula is tack-free in as little as 4 hours at 75°F. -
NuFlex® 333 Aquarium Silicone Sealant is a one-part, moisture curing, 100% silicone sealant that has been specially formulated for the construction of aquariums. It will never shrink, dry out or crack; remains permanently flexible and is harmless to fish and plants. -
Arbor Adaptor This 1/4" mandrel with 1/2" arbor fits any hand-held drill. For use with Buffing Ki -
Contains double bias 17oz stitched together. Does not have a mat backing. For heavy duty reinforcement in applications where mat is not desired. 50" wide, sold by the linear yard -
A gel-coat specifically made to provide a durable surface on production molds. Gelcoat is designed to withstand high temperature curing cycles. Requires 1-2% (or about 5-10 drops per oz) MEKP catalsyt. (sold separate) Need larger size? 5 gal pails and 50 gal Drums as available as well. contact [email protected] for more info. -
Black Polycarbonate -
Out of stock
Black Styrene Sheets 4x8 by special order. Contact [email protected] to request -
Brass Padlock. 7/16" Shackle width. 3 keys. -
Remove fine scratches and polish edges from plastic surfaces with this conveniently packaged kit. Each kit containes a 4" diameter sewn cloth buffing wheel and a 2oz stick of buffing compound. Use with Arbor adapter (sold sperate). Instructions on back of card. -
An alternative to standard caulking compounds, flexible, compressible, Butyl Caulking Tape can be cut or shaped to fit practically any application. Uses include sealing deck hardware, including hatches, ventilators and more. Tough rubber, pressure sensitive mass, offers excellent adhesion to a variety of surfaces (no applicators required). Used to seal out: dirt, dust, moisture and water. Easy to use in tape form. Low moisture vapor transmission value. Tape is 1/8" thick and comes in a roll 3/4"W x 20' long. -
An alternative to standard caulking compounds, flexible, compressible, Butyl Caulking Tape can be cut or shaped to fit practically any application. Uses include sealing deck hardware, including hatches, ventilators and more. Tough rubber, pressure sensitive mass, offers excellent adhesion to a variety of surfaces (no applicators required). Used to seal out: dirt, dust, moisture and water. Easy to use in tape form. Low moisture vapor transmission value. Tape is 1/8" thick and comes in a roll 3/4"W x 20' long.
-
Sold per Yard, multiple yards supplied as continuous length A high strength, medium modulus carbon fibre tow, also referred to as a ribbon, is loosely bonded together with an epoxy sizing to hold the fibres for handling and bonding purposes. This 24K tow is formed from approximately 24,000 bundled carbon fibre filaments so its super strong! Ideal for many applications that require strengthening. Used extensively by hobbyist and in several commercial industries including surfboard construction, bike and paddle reinforcement, RC model plane and boats.
Social Contact