-
Color Samples can be found here: Acrylic Color Chart
-
Color Samples can be found here: Acrylic Color Chart
-
Alumilite Dyes allow users to color any of Alumilite's high quality resins evenly and completely with a reacting dye that will never leach. We carry seven basic colors and three flesh tone colors. Add the dyes to the "A" side by weight up to 5% to achieve the color you desire. Use the flesh tones according to your preference of shade (flesh tones are typically used in Alumilite White for a more natural appearance). Dyes can be used in Clear Alumilite to make a translucent colored casting. *Note that Green translucent dye is not compatible with epoxy chemistry and will shift to a blue color. This is due in part to chemistry, but also shift in hues (yellowing) over time of epoxy, causing changes in color. Opaque colors include white, black, flo red, flo orange, flo yellow, flo green, tan, beige, and dark brown. Some translucency can be achieved by adding an incredibly small amount of these dyes to clear resin.
-
Color Samples can be found here: Acrylic Color Chart
-
Clear Polycarbonate (Often referred to as their brand names such as "Lexan” or “Makrolon") POLYCARBONATE is different from acrylic; polycarbonate is almost unbreakable, if hit it will dent but it will not break. This quality makes it a bit softer and less rigid than acrylic. It is not UV stable. In sunlight it has life of 5 to 10 years. A UV treated version is available by special order. It is lighter than glass, but will scratch more easily than acrylic or glass.
-
The least expensive, mat is made of strands of glass, randomly laid out to provide multi-directional strength. Once wetted out it conforms well to shapes. It will make the stiffest laminate, but, it is the weakest. Often, first a layer of mat is laid down then a cloth or woving, then a layer of mat and so on. The procedure insures the stiffness of mat with the tensile strength of cloth. Alternating mat and cloth also insures a good bond between layers of cloth, especially the heavier ones. Fiberglass Mat 3/4oz per sq yd 50″ wide sold by the linear yard Fiberglass Mat 1oz per sq yd 38″ wide sold by the linear yard Fiberglass Mat 1.5oz per sq yd 50″ wide sold by the linear yard Full rolls (usualy ~100-220 Yards) available as well. Contact sales@plasticworld.ca
-
Color Samples can be found here: Acrylic Color Chart
-
Sale!6 Oz E-glass tape, offers excellent flexural and tensile strength, high chemical and moisture resistance. It will conform to compound curves without cutting. It is made of fine threads of glass in a twist and ply construction, woven at 90 degree Available in 1″, 2 ”, 3″, 4 ” and 6″ wide. Sold by the yard. Orders will be cut as one length up to 50 yards.
-
Out of stockDISCONTINUED For alternate options try: Weldon 4 Or Methylene Chloride
Social Contact