-
A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can. Pol-Ease 2300 is an effective release for most Polytek products but should not be used before pouring or brushing liquid silicone mold rubber - in this case Pol-Ease 2500 is the proper choice. Brushing out the release with a soft brush can improve results. -
An aerosol release agent that has two purposes. It can be used as a release when making silicone rubber molds as well as it can be used for spraying into molds where a more easily removed release agent is needed for painting or finishing cast parts. Pol-Ease 2500 should be brushed out with a soft brush for improved results. 13 Oz can. -
Partall® Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall® Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall® Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall® Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics. -
A two piece male/female quick disconnect. Maximum temperature is 500 deg -
The R-Cast2.0 is designed for mass casting like river tables, charcuterie board and any other artistic project. Improved cure time, 3-5 days Clear and bubble-free. Anti-yellowing UV resin Improved hardness adapted to the movements of the wood. Solvent-free RC2 can be used for pours greater than 1/2″ (1.3cm) and up to 2.5″ (5cm) taking volume into account. The use of fans is strongly recommended for thick castings. 30L Kits (~7.5gallon) available by special order for larger projects. Contact [email protected] -
R-EPOXY UV is a fast cure top coat epoxy (12 hours). Always respect 1A:1B mixing ratio.This resin is optimal for all kinds of coating applications with pours up to 1/4″ at once . It offers an ultra glossy finish. Ideal for Seal and repair knots and cracks in wood. Top coat for bar, countertop and table. Enhance wood, objects and canvas. Jewel and art Logo engraving on wood Commercial projects Looking for an epoxy to make river table, check out our R-Cast2.0 ! -
The new R-Fast is not only fast, it’s REALLY FAST! The R-Fast is specially designed for charcuterie board and any other artistic project. A maximum of 6 liters per pour is recommended. Improved cure time, 24 hours Clear and bubble-free. Anti-yellowing UV resin Improved hardness adapted to the movements of the wood. Solvent-free Maximum recommended thickness is 1″ with a maximum of 6 liters per pour. The use of fans is strongly recommended for thick castings.
Social Contact