-
Polycarbonate tubes and rod are generally not stock but can be special ordered relatively quickly. See below for general availability and email [email protected] for current pricing -
Polycarbonate tubes are not stock. They are sold in 8 foot lengths and by the case are we typically get shipments in every other week. See below for general availability and email [email protected] for current pricing. If images below are not clear on your device please click the thumbnail versions on the left side to view them resized
-
A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can. Pol-Ease 2300 is an effective release for most Polytek products but should not be used before pouring or brushing liquid silicone mold rubber - in this case Pol-Ease 2500 is the proper choice. Brushing out the release with a soft brush can improve results. -
An aerosol release agent that has two purposes. It can be used as a release when making silicone rubber molds as well as it can be used for spraying into molds where a more easily removed release agent is needed for painting or finishing cast parts. Pol-Ease 2500 should be brushed out with a soft brush for improved results. 13 Oz can. -
Partall® Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall® Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall® Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall® Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics. -
A two piece male/female quick disconnect. Maximum temperature is 500 deg -
The R-Cast2.0 is designed for mass casting like river tables, charcuterie board and any other artistic project. Improved cure time, 3-5 days Clear and bubble-free. Anti-yellowing UV resin Improved hardness adapted to the movements of the wood. Solvent-free RC2 can be used for pours greater than 1/2″ (1.3cm) and up to 2.5″ (5cm) taking volume into account. The use of fans is strongly recommended for thick castings. 30L Kits (~7.5gallon) available by special order for larger projects. Contact [email protected]
Social Contact