-
Stiff 4 inch by 4 inch plastic spreader with 1/8, 3/16, and 1/4 inch notches on three sides for quickly applying thickened epoxy at a constant rate over large areas. Thin straight edge is ideal for applying layers of reinforcing fabrics. -
A reusable syringe. Can be loaded with epoxy mixture for injecting into tight spots. Ideal for use with epoxy or thicker glues Tip can be cut to make larger Not suitable for use with water thin solvents Holds about 0.5 fl. oz. -
407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown color. -
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its color is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM fillers. -
403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting/penetrating capability. -
404 High-Density filler is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. -
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Color: off-white -
410 Microlight is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color.
-
West System 206 Slow Hardener
-
Proper epoxy curing and full development of its physical properties requires a precise ratio of resin and hardener. The WEST SYSTEM 300 Mini Pump Set makes it easy to dispense the proper ratio, while eliminating the hassle of measuring by weight or volume. These calibrated mini pumps deliver the correct working ratio with one full pump stroke each of resin and hardener. They mount directly on the containers and can be left installed during storage. -
For use with the West System 105 Resin.
Social Contact