-
Out of stock
Clear, Light bodied, medium-setting cement for bonding acrylic, ABS, cellulose acetate butyrate (CAB), rigid PVC, and polystyrene to themselves and to each other. -
Out of stock
DISCONUNITED - We recommend using pure Tetrahydrofuran, which was the main ingredient in the 2007, instead for PVC bonding applications -
Out of stock
DISCONTINUED by manufacture due to changes in EPA regulations try Methylene Chloride Cures as strong, slightly faster, applies the same. It is the primary ingredient in Weldon 3 -
Out of stock
DISCONTINUED. Due to changes in EPA regulations this product is no longer available and its low VC counterpart 4SC is only available in Europe. try Methylene Chloride Cures as strong, slightly faster, applies the same. It is the primary ingredient in Weldon 4 -
Out of stock
Clear, Two-component, reactive, high strength adhesive for bonding and fabricating all acrylics (extruded, cast, and cross linked) to each other. It will also bond acrylic to polyester, butyrate, PVC, ABS, PETG, etc. -
Out of stock
THIS SIZE IS DISCONTINUED BY MANUFACTURER - GALLONS AVAINLE BY SPECAIL ORDER IN CASE LOTS OF 4 GALLONS. PLEASE EMAIL [email protected] FOR MORE INFO. Low VOC for bonding ABS only. Milky colour, Medium bodied, fast setting. -
Light bodied, fast setting, versatile solvent cement for bonding flexible or rigid vinyl to itself or to urethane, leather, canvas, ABS, foamed PVC, butyrate, and wood. It bonds quickly upon contact with substrates and the bond strength will increase as solvent dissipates. -
Weld-On® 3061 is a clear thinner for use only with Weld-On 40 component A in cases where a lower viscosity is desired. For use as a reactive diluent with Weld-On 40 component A To maintain similar curing characteristics, do not add more than 10% of Weld-On 3061 Thinner to Weld-On 40 component “A.” -
West System 209 Extra Slow Hardener. For use with the West System 105 Resin. -
403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting/penetrating capability. -
404 High-Density filler is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. -
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its color is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM fillers. -
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Color: off-white -
407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown color. -
410 Microlight is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color.
-
A reusable syringe. Can be loaded with epoxy mixture for injecting into tight spots. Ideal for use with epoxy or thicker glues Tip can be cut to make larger Not suitable for use with water thin solvents Holds about 0.5 fl. oz. -
Stiff 4 inch by 4 inch plastic spreader with 1/8, 3/16, and 1/4 inch notches on three sides for quickly applying thickened epoxy at a constant rate over large areas. Thin straight edge is ideal for applying layers of reinforcing fabrics. -
White Rouge Buffing Compound Bar Recommended for final polishing after Red Tripoli. Finest cut of the finishing compunds. Approx. 2lb Bar. -
Xylene is used as a solvent. In this application, the mixture of isomers is often referred to as xylenes or xylol. Solvent xylene often contains a small percentage of ethylbenzene. Like the individual isomers, the mixture is colorless, sweet-smelling, and highly flammable. Areas of application include printing, rubber, and leather industries. It is a common component of ink, rubber, adhesive, and leather industries. In thinning paints and varnishes, it can be substituted for toluene where slower drying is desired. It can be used as a cleaning agent, e.g., for steel, silicon wafers, and integrated circuits. -
Our reusable squeegee allows smooth application of resin or plastic filler. The semi-flexible design bends to follow contours on curved areas. Made from solvent-resistant polyethylene – uncured resin or filler is easily cleaned with acetone, while cured materials easily break off. Beveled edges Score & snap (or cut) to smaller size Handy when fiberglassing Dimensions: 3.5" x 6"
Social Contact