-
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its color is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM fillers. -
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Color: off-white -
407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown color. -
410 Microlight is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color.
-
A reusable syringe. Can be loaded with epoxy mixture for injecting into tight spots. Ideal for use with epoxy or thicker glues Tip can be cut to make larger Not suitable for use with water thin solvents Holds about 0.5 fl. oz. -
Stiff 4 inch by 4 inch plastic spreader with 1/8, 3/16, and 1/4 inch notches on three sides for quickly applying thickened epoxy at a constant rate over large areas. Thin straight edge is ideal for applying layers of reinforcing fabrics. -
White Rouge Buffing Compound Bar Recommended for final polishing after Red Tripoli. Finest cut of the finishing compunds. Approx. 2lb Bar. -
Xylene is used as a solvent. In this application, the mixture of isomers is often referred to as xylenes or xylol. Solvent xylene often contains a small percentage of ethylbenzene. Like the individual isomers, the mixture is colorless, sweet-smelling, and highly flammable. Areas of application include printing, rubber, and leather industries. It is a common component of ink, rubber, adhesive, and leather industries. In thinning paints and varnishes, it can be substituted for toluene where slower drying is desired. It can be used as a cleaning agent, e.g., for steel, silicon wafers, and integrated circuits. -
Our reusable squeegee allows smooth application of resin or plastic filler. The semi-flexible design bends to follow contours on curved areas. Made from solvent-resistant polyethylene – uncured resin or filler is easily cleaned with acetone, while cured materials easily break off. Beveled edges Score & snap (or cut) to smaller size Handy when fiberglassing Dimensions: 3.5" x 6"
Social Contact