-
Out of stock
3mm Acrylic #6362 Metallic Silver -
For surveillance, special use and theatrical applications, See-Thru Acrylic Mirror is an ideal choice. Also known as two-way mirror, See-Thru Mirror allows a percentage of incident light to pass through while reflecting the remainder. When illuminated, the side with the light source will be reflective and the opposite (darkened) side will be transparent. Stock size of full sheet is 4'x6' - 4x8 by special order email [email protected] for more info -
Color Samples can be found here: Acrylic Color Chart -
4.25" Turntable-Clear, solid-style, Styrene. Wt. Capacity: 50 lbs. These solid turntables incorperate an internal metal ball bearing system for quiet, smooth-running operation. -
5.5" Turntable-Clear, solid-style, Styrene. Wt. Capacity: 50 lbs. These solid turntables incorperate an internal metal ball bearing system for quiet, smooth-running operation.
-
It is used when a very stiff product with high tensile and compressive strength (both greater than steel) is required. It has weak shear strength and is not impact resistant. It is best used, when making parts that need to be light weight but are under high stress. It is more expensive than cloth, but replaces several layers of cloth in terms of strength. When well done, the finished product makes a beautiful looking part such as a car hood. Use only with epoxy resins. This item is sold by the linear yard. Multiple yards will be cut as one length. -
Disposable 5cc Syringe. Comparable with both the 22 and 25 gauge tips (sold separate). -
The stuff in bullet proof vests. It has the best resistance to impact, abrasion, vibration and growing crack length. It has high tensile strength but low compressive strength, so it is not good for load bearing parts. It is UV sensitive and hydroscopic. It can not be sanded. Use only with Epoxy resins. This item is sold by the linear yard. Multiple yards will be cut as one length. -
Sold by the yard in 2" width It has the best resistance to impact, abrasion, vibration and growing crack length. It has high tensile strength but low compressive strength, so it is not good for load bearing parts. It is UV sensitive and hydroscopic. It can not be sanded. Use only with Epoxy resins. This item is sold by the linear yard. Multiple yards will be cut as one length. -
Color Samples can be found here: Acrylic Color Chart
-
It is used when a very stiff product with high tensile and compressive strength (both greater than steel) is required. It has weak shear strength and is not impact resistant. It is best used, when making parts that need to be light weight but are under high stress. It is more expensive than cloth, but replaces several layers of cloth in terms of strength. When well done, the finished product makes a beautiful looking part such as a car hood. Use only with epoxy resins. This item is sold by the linear yard. Multiple yards will be cut as one length. -
Out of stock
It is used when a very stiff product with high tensile and compressive strength (both greater than steel) is required. It has weak shear strength and is not impact resistant. It is best used, when making parts that need to be light weight but are under high stress. It is more expensive than cloth, but replaces several layers of cloth in terms of strength. When well done, the finished product makes a beautiful looking part such as a car hood. Use only with epoxy resins. This item is sold by the linear yard. Multiple yards up to 50yds will be cut as one length. -
9" Turntable-Clear, solid-style, Styrene. Wt. Capacity: 50 lbs. These solid turntables incorporate an internal metal ball bearing system for quiet, smooth-running operation.
-
ABS Black Haircell (1 side) ABS 4x8 Sheets -
ABS White Hair Cell (1 side) 4x8 Sheets -
Out of stock
ABS White Smooth 4x8 Sheets Please email [email protected] for availability and pricing. -
Clear Extruded Acrylic 3/4" Angle x 72" long -
Clear Solid Acrylic Sphere (Ball) -
Clear Acrylic rods sold in 6' lengths. Other diameters (1/2" , 5/8", 7/8", 1.25", 1.5" and 2") available by special order subject to minimums. Contact [email protected] for more info. -
Clear Extruded Acrylic Half-Round Rod. Sold in 6′ lengths. Additional sizes or solid black color available by special order. Email requests to [email protected] -
Clear Solid Acrylic Half-sphere (Half Ball) -
Pin-Style Hasp-1"w x 2-1/4"L. Clear acrylic. A removable pin enables this 2-piece hasp to reverse for either corner or flat mounting. -
Clear Acrylic Molded Display "Ice". Clear molded acrylic pieces look like real ice! Perfect for displays -
Clear Extruded Acrylic 1.75" x .75" L Shape x 72" long -
These sleek-looking pulls are recessed on the bottom so fingers can slide underneath them for easy pulling -
Clear Extruded Acrylic rectangle strips. Sold in 6′ lengths. Additional sizes available by special order, Email requests to [email protected] -
Clear Extruded Acrylic Round Rod. Sold in 6' lengths. Additional sizes or colors available by special order. Email requests to [email protected] -
Clear Extruded Acrylic Round Tube. Sold in 6′ lengths. Size indicated in drop down menu represents ID x OD. Additional sizes, wall thickness and colors available by special order, Email requests to [email protected] -
Clear Extruded Acrylic Square Rod. Sold in 6′ lengths. Additional sizes or colors available by special order. Email requests to [email protected] -
Clear Extruded Acrylic Square Tube. Sold in 6′ lengths. Size indicated in drop down menu represents ID x OD. Additional sizes or colors available by special order, Email requests to [email protected] -
Clear Extruded Acrylic Triangle Rod. Sold in 6′ lengths. Additional sizes available by special order. Email requests to [email protected] -
Out of stock
ACRYLITE® LED color changing back lit black/white acrylic sheet appears dark during the day and with added backlighting, glows white at night. This unique attribute is possible due to a special pigment formulation that yields 25 percent light transmittance when backlit, yet appears dark and opaque without backlighting. dark in daylight and glows at night eliminates the need for a perforated film special pigment formulation leads to energy savings extremely weatherable can be cut, bent, and formed with ease -
Air Dry is used when to turn your unwaxed resin in to waxed for your final top coat. If you only need one jug of resin or gelcoat and you plan to do multiple layers, then you need this as an additive for that last layer. It contains parrifin wax suspended in styrene solvent. The wax rises to the surface as the material cures and seals the surface from oxygen. Resin will only cure in the absence of oxygen so this is needed for the top layer. If it is not used the top layer will feel sticky (especially in the heat).
Social Contact