Free pickup in Toronto · (416) 630-6745

Plastic World
R-Fast – Casting epoxy

Photos are representative. Colour and finish may vary slightly.

R-Fast – Casting Epoxy

The new R-Fast is not only fast, it’s REALLY FAST!

The R-Fast is specially designed for charcuterie board and any other artistic project. A maximum of 6 liters per pour is recommended.

Improved cure time, 24 hours
Clear and bubble-free.
Anti-yellowing UV resin
Improved hardness adapted to the movements of the wood.
Solvent-free
Maximum recommended thickness is 1″ with a maximum of 6 liters per pour.

The use of fans is strongly recommended for thick castings.

SizeChoose one

Price

From$49.99CAD

Choose a size to see the price.

Request a quote
  • Free pickup at 111 Millwick Drive, ready today if ordered by 11:30 AM
  • Delivery anywhere in Canada: courier rates at checkout
  • Cut to size at the counter
  • Mon–Fri 8:30 AM – 5:00 PM

Multi-layer application
MECHANICAL ADHESION: Once cured, lightly to sand first pour (use 120 grit). It is important to “scratch” the surface to ensure a perfect bonding between both layers.
Frequently Asked Questions
Can my epoxy freeze? A:Yes and no! UV Resins are very sensitive to freezing, which has the effect of causing crystallization (deposition and solidification of part A). Simply reheat the container in a water bath to bring the resin back to a liquid state. Refer to the technical sheet for more details.
If I miscalculated the amount of epoxy required, can I pour right away? A:Yes, within 2 hours. After this time, it will be necessary to wait until it gets fully cured
What should I use to clean the tools?
A: Xylene
If i bought my epoxy last year, is it still good?
A:The recommended pot life is 1 year after purchase. With time, the hardener oxidizes and turns amber. You will then have to use pigments to hide that amber color.
Will my epoxy harden faster if I put more hardener?
A: No. The ratio must be perfectly respected in a volume ratio of 2A:1B. An improper ratio will cause the epoxy to not fully cure.
What is the recommended temperature for casting ?
R: 21°C, +/- 5 degrees. High temperature could lead to an exothermic reaction (overheating). Low temperature will cause bubbles in the epoxy.

Customer Reviews

No reviews yet. Bought R-Fast – Casting epoxy? Tell other customers how it went.

Visit us

Walk in for cut-to-size while you wait, or pick up your order.

Plastic World

111 Millwick Drive, Units 7–11
Toronto, ON M9L 1Y4

Mon–Fri 8:30 AM – 5:00 PM · Closed weekends & holidays

(416) 630-6745

Open in Maps
Get directions

Contact us

Questions, sizes or a drawing to quote? Send it here. We usually reply the same business day, and always within one business day.