These terms apply to everything you buy from us, in store, by phone or online. Shipping, pickup and returns have their own pages: shipping and pickup and returns.
Tolerances on Hand Work
When we cut, drill, bend or glue by hand, expect these tolerances:
- Straight cuts: ±1/16″, or ±1/8″ on finished edges.
- Drilled holes: ±1/16″ on placement and size.
- Bends and joints: ±2°, and ±1/8″ on alignment.
- Glued joints aren't seamless and may show some bubbles.
- We don't guarantee that anything is watertight.
Need tighter tolerances? Ask for laser or CNC cutting. See cut to size.
Tolerances on Stock Material
Packaged goods meet their manufacturer's standards. For raw stock, unless we state otherwise:
- Sheet: thickness ±10%. Full sheets may be oversize to allow for finishing.
- Rod: diameter +0.060″/−0″ under 6″, or +0.125″/−0″ over 6″. Full lengths may be oversize to allow for finishing.
Metric and Imperial Sizes
We may convert sheet thickness between metric and imperial to the closest size. These are treated as the same:
| Imperial | Metric |
|---|---|
| 1/16″ | 1.5 mm |
| 1/8″ | 3 mm |
| 3/16″ | 4.5 mm |
| 1/4″ | 6 mm |
| 3/8″ | 9 mm |
| 1/2″ | 12 mm |
| 3/4″ | 18 mm |
| 1″ | 24 mm |
Volumes may be rounded and converted the same way:
| Imperial | Metric |
|---|---|
| 1 quart | 1 L |
| 1 gallon | 4 L |
| 5 gallons | 20 L |
If you need an exact size, tell us when you order that it must not be substituted. Manufacturer tolerances still apply.
Fitness for Use
Plastic World, its suppliers and its employees make no promise that a product suits your intended use, and accept no liability for it. Always use the right safety equipment and tools, and read the instructions and safety data sheet (SDS) before you start.