Free pickup in Toronto · (416) 630-6745

Plastic World
R-Cast 2.0 UV Casting Epoxy

Photos are representative. Colour and finish may vary slightly.

R-Cast 2.0 UV Casting Epoxy

The R-Cast2.0 is designed for mass casting like river tables, charcuterie board and any other artistic project.

Improved cure time, 3-5 days
Clear and bubble-free.
Anti-yellowing UV resin
Improved hardness adapted to the movements of the wood.
Solvent-free
RC2 can be used for pours greater than 1/2″ (1.3cm) and up to 2.5″ (5cm) taking volume into account. The use of fans is strongly recommended for thick castings.

30L Kits (~7.5gallon) available by special order for larger projects. Contact Sales@plasticworld.ca

Size3.0G Kit

Price

$319.99CAD

In stockSKU: 1563155

Request a quote
  • Free pickup at 111 Millwick Drive, ready today if ordered by 11:30 AM
  • Delivery anywhere in Canada: courier rates at checkout
  • Cut to size at the counter
  • Mon–Fri 8:30 AM – 5:00 PM

Multi-layer application
CHEMICAL ADHESION: To allow maximum adhesion, we recommend pouring the successive layers when the product is dry to the touch, but still soft (tacky). Normally, this texture is obtained 36 hours after pouring. * Never pour if the first layer is still liquid*.
MECHANICAL ADHESION: If the R-CAST2.0 is dry (more than 84 hours), you need to sand the intial pour (use 120 grit). It is important to “scratch” the surface to ensure a perfect bonding between both layers.

Frequently Asked Questions
Can my epoxy freeze? A:Yes and no! UV Resins are very sensitive to freezing, which has the effect of causing crystallization (deposition and solidification of part A). Simply reheat the container in a water bath to bring the resin back to a liquid state. Refer to the technical sheet for more details.
If I poured my river and I run out of epoxy, can I pour right away? A:Yes, within 2 hours. After this time, it will be necessary to respect the instructions for application in multiple layers.
What should I use to clean the tools?
A: Xylene
If i bought my epoxy last year, is it still good?
A:The recommended pot life is 1 year after purchase. With time, the hardener oxidizes and turns amber. You will then have to use pigments to hide that amber color.
Will my epoxy harden faster if I put more hardener?
A: No. The ratio must be perfectly respected in a volume ratio of 2A:1B. An improper ratio will cause the epoxy to not fully cure.
After sealing the edges(wood sides) , how long should I wait before pouring the R-Cast2.0?
A: You need to wait 24 hours. It is mandatory to sand lightly (grain 120) in order to obtain good bonding.
What is the recommended temperature for casting a river table?
R: 21°C, +/- 5 degrees. High temperature could lead to an exothermic reaction (overheating). Low temperature will cause bubbles in the epoxy.

Customer Reviews

No reviews yet. Bought R-Cast 2.0 UV Casting Epoxy? Tell other customers how it went.

Visit us

Walk in for cut-to-size while you wait, or pick up your order.

Plastic World

111 Millwick Drive, Units 7–11
Toronto, ON M9L 1Y4

Mon–Fri 8:30 AM – 5:00 PM · Closed weekends & holidays

(416) 630-6745

Open in Maps
Get directions

Contact us

Questions, sizes or a drawing to quote? Send it here. We usually reply the same business day, and always within one business day.