-
Air Dry is used when to turn your unwaxed resin in to waxed for your final top coat. If you only need one jug of resin or gelcoat and you plan to do multiple layers, then you need this as an additive for that last layer. It contains parrifin wax suspended in styrene solvent. The wax rises to the surface as the material cures and seals the surface from oxygen. Resin will only cure in the absence of oxygen so this is needed for the top layer. If it is not used the top layer will feel sticky (especially in the heat). -
A gel-coat specifically made to provide a durable surface on production molds. Tooling gel is designed to withstand high temperature curing cycles. Requires 1-2% (or about 5-10 drops per oz) MEKP catalsyt. (sold separate) Need larger size? 5 gal pails and 50 gal Drums as available as well. contact sales@plasticworld.ca for more info. -
A clear polyester resin suitable for casting clear parts. Requires 1-2% (or about 5-10 drops per oz) MEKP catalsyt. (sold separate) 5 gal pails always available on site however must be order via sales@plasticworld.ca due to dangerous goods classification for shipping. Need larger size? 5 gal pails and 50 gal Drums as available as well. contact sales@plasticworld.ca for more info. -
A thickened high quality resin, designed to top coat fiberglass lamination. Gelcoats give a better look and protection to the fiberglass underneath. Dyes can be added to change color. Requires 1-2% (or about 5-10 drops per oz) MEKP catalsyt. (sold separate) Need larger size? 5 gal pails and 50 gal Drums as available as well. contact sales@plasticworld.ca for more info. -
G660-4.5 Gel Coat & Resin spray Gun includes a 4.8 mm nozzle to rapidly spray all size parts. Consumption CFM is 7-12 Feed Type is Gravity Pattern Width of Fan Shape at 180 mm. Air Pressure is 50 to 80 psi. Rated Pressure 70 psi. Output is 300 gm/min. -Perfect for Fiberglass Shops of all sizes. yet competitively priced for even do it yourself project - Gravity Feed spray gun used specifically for Gel Coat & Polyester based Resin systems. - Suitable for Boat paints and expoy resins as well - features are a large 1-liter plastic container to hold plenty of product so more spraying is accomplished with less filling. -
Styrene is commonly used to thin down polyester resins and gelgoats -
MEKP is composed of methyl ethyl ketone peroxide, a catalyst, added to polyester and vinyl resins. When MEKP is mixed with the resin, the resulting chemical reaction causes heat to build up and cure or harden the resin. -
A general purpose polyester (fiberglass) resin. Our resins are purchased direct from major reputable suppliers and are consistent in quality and performance. Unwaxed resin remains a bit tacky on the side exposed to air. This is fine when adding more layers as you avoid sanding. Air Dry additive can be added to unwaxed resin to make it waxed. Requires 1-2% (or about 5-10 drops per oz) MEKP catalsyt. (sold separate) Need larger size? 5 gal pails and 50 gal Drums as available as well. contact sales@plasticworld.ca for more info. -
A superior grade of resin that outperforms polyester in better resistance to corrosion, lower water absorption, higher strength, and damage resistance compared to polyester resins. Requires 1-2% (or about 5-10 drops per oz) MEKP catalsyt. (sold separate) Need larger size? 5 gal pails and 50 gal Drums as available as well. contact sales@plasticworld.ca for more info. -
A general purpose polyester (fiberglass) resin. Our resins are purchased direct from major reputable suppliers and are consistent in quality and performance. Waxed resin has wax added to it which rises to the top during curing, seals off the air and leaves the cured surface smooth and hard. Requires 1-2% (or about 5-10 drops per oz) MEKP catalyst. (sold separate) Need larger size? 5 gal pails and 50 gal Drums as available as well. contact sales@plasticworld.ca for more info.
Social Contact